ENDURO BEARINGS 6902-2RS-MAX

ENDURO BEARINGS 6902-2RS-MAXDescription ENDURO 6902 2RS MAX (6902 VRS) SLT (Solid Lubrication Technology) Wheel & Bottom Bracket Bearings. With an SLT bearing the balls arent retained with cage but with a almost fully encapsulating polymer. Its allows a very small but exact amount of ball to pertrude and contact the inner and outer races. For use in wheels and BBs the combination of the RS (rubber seal) and the SL technology will keep the balls and races totally clear of dirt,

Description

ENDURO 6902-2RS-MAX (6902-VRS)

SLT (Solid Lubrication Technology) Wheel & Bottom Bracket Bearings.
With an SLT bearing the balls aren’t retained with cage but with a almost fully encapsulating polymer. Its allows a very small but exact amount of ball to pertrude and contact the inner and outer races.
For use in wheels and BB’s the combination of the RS (rubber seal) and the SL technology will keep the balls and races totally clear of dirt, contamination, pitting and premature failure from jet washing or over degreasing.

Dimensions – 15 x 28 x 7

Alternate References – 6902-LLU-MAX

Designed specifically for suspension pivots, MAX complement type bearings address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. This is accomplished with a design where the maximum number of balls are inserted into the bearing with no cage separating them allowing the bearing to take a greater load at any point the bearing pivots to.