6 Way/12 Way Blade Fuse Box Block Holder ATO ATC for Car Marine Boat Waterproof

6 Way/12 Way Blade Fuse Box Block Holder ATO ATC for Car Marine Boat WaterproofFunction of fuse: When the circuit fails or is abnormal, the current continues to rise, and the increased current may damage some important or valuable components in the circuit, and may also burn the circuit or even cause a fire. Fuses protect electronic equipment from overcurrent and also protect electronic equipment from serious injury caused by internal faults. Therefore, there is a rating on each fuse, and when the current exceeds the rating, the

Function of fuse:
When the circuit fails or is abnormal, the current continues to rise, and the increased current may damage some important or valuable components in the circuit, and may also burn the circuit or even cause a fire. Fuses protect electronic equipment from overcurrent and also protect electronic equipment from serious injury caused by internal faults. Therefore, there is a rating on each fuse, and when the current exceeds the rating, the fuse will blow. If the fuse is correctly placed in the circuit, the fuse will cut off the current when the current abnormally rises to a certain height and temperature, thus protecting the safe operation of the circuit.

Features:
1. The product is made of PA66 flame retardant and high and low temperature resistant material, which fully meets the requirements that the fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not be broken, deformed, burned and short-circuited during use. conditions of
2. All fasteners are stainless steel, the fuse box is input, which can be installed more quickly, and the fuse box is fixed with self-tapping screws, which is easier and safer to install.
3. The product comes with a sticker, which can be attached to the electrical appliance we connect according to the name on the sticker. When the fuse is broken, we can immediately identify which electrical appliance has a problem, saving time and effort
4. The product is delivered with double fuses. When applied, the fuse is burned out and can be replaced from the spare fuse immediately, and the fuse has sent multiple amps. The fuse for amps can be selected according to the current electrical appliance.
5. This model is a waterproof fuse box. It is aimed at large-scale wading vehicles such as off-road, RV, and boats. No matter what the quality of the fuse boxes on the market, they are mainly dust-proof and have no waterproof measures. A fuse box through the front waterproof cover, Shun Ding waterproof gasket, the whole body sealing ring, punching installation wiring after the waterproof grade IP66

Note:
Suitable for ATO or ATC fuses from 1A to 20A.
1 Input/6 Output:

Specifications:
1. Type: 6 Way Fuse Box
2. Product size: 87*92*42mm
3. Input rated voltage: 32V
4. Input rated current: 100A
5. Output maximum current: 20A per circuit
6. Product material: PA66 base, PC dust cover, nickel-plated copper terminals, stainless steel screws, butadiene rubber waterproof gasket, PP×70 sticker, silicone seal
7. Main wire terminal: M5 threaded stud (100A 32V DC max)
8. Main wire conductor: #4-6AWG
9. Single Wire Terminal: Copper/Nickel Plated 1/4" (6.3mm) (20A 32V DC max)
10. Single wire conductor: #12-16AWG
11. Hole size: 55*60mm
12. Installation range: It can be installed on cars, off-road vehicles, RVs, buses, yachts, boats, etc.
13. Indicator function: When the red LED light is on, it means that the fuse has been disconnected, and the fuse needs to be replaced in time to continue running
14. Scope of use: It can be directly connected to the line of any electrical appliance on the car/ship. Such as: dome lights, car headlights, width lights, fog lights, warning lights, car refrigerators, car chargers, car fans, car TVs, etc.