Aerpro APV4CAM SMART 4 CAMERA SWITCHER

Specifications:

• ADAPTER TYPE: MULTI CAMERA ADD ON INTERFACE
• VEHICLE PLUG: UNIVERSAL HARD WIRED
• CAMERA PLUG: RCA
• 12 PIN HARNESS DETAILS:
• YELLOW FEMALE RCAS: VIDEO INPUT 1, 2, 3, 4
• YELLOW MALE RCA: VIDEO OUTPUT
• PURPLE: REVERSE TRIGGER OUTPUT (+)
• 14 PIN HARNESS DETAILS:
• YELLOW: PERMANENT 12V
• BLACK: GROUND
• GREY: TRIGGER 1 (Negative)
• RED: TRIGGER 2 (Negative)
• WHITE: TRIGGER 3 (Negative)
• PINK: TRIGGER 4 (Negative)
• ORANGE: TRIGGER 1 (Positive)
• PURPLE: TRIGGER 2 (Positive)
• BLUE: TRIGGER 3 (Positive)
• GREEN: TRIGGER 4 (Positive)
• NOTES:
• Video Inputs / Outputs: The 4 inputs have priority in descending numerical order (eg. Input 2 will take priority over Input 3 when Input 2 is triggered). Input 1 has the highest priority and is therefore optimal for the connection of a reversing camera in many applications.
• Triggers: Positive Input triggers accept input voltages in the range of 2.5V to 12V. A voltage of less than 2.5V will fail to enable the channel. Negative Input triggers must be connected to ground to enable a channel. Do not connect both + and - trigger wires for a given channel. The reverse trigger output provides a 100mA 12V (Positive) trigger whilst any of the input triggers are activated. Upon deactivation of the last positive or negative trigger, the last video input source and the reverse trigger output will remain active for an additional 3 seconds.