Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Skystars F7HD Stack F722HD Pro 4 Flight Controller & KM65A F4 128KHz AM32 65A 4in1 ESC - 30 x 30mmSkystars F7+KM65 is a powerful stack for 5" freestyle and racing drones or 7 8" long range drones. The flight controller with modern F7processor has 16MB memory for blackbox and 5V 3A and 10V 3A BEC. The flight controller can be conveniently used on a drone with both digital and analog video transmission. The pads for connecting the LEDs are in the corners. The integrated barometer for altitude measurement also comes in handy. The KM65 ESC supports 3
Skystars F7+KM65 is a powerful stack for 5" freestyle and racing drones or 7-8" long-range drones. The flight controller with modern F7processor has 16MB memory for blackbox and 5V/3A and 10V/3A BEC. The flight controller can be conveniently used on a drone with both digital and analog video transmission. The pads for connecting the LEDs are in the corners. The integrated barometer for altitude measurement also comes in handy.
The KM65 ESC supports 3-6S battery power and current up to 65A, which makes it playfully handle motors of size 2207-2808. The ESC has an aluminum heat sink on top to help dissipate heat better while protecting sensitive components from mechanical damage. The ESC uses a powerful F4 32-bit processor and AM32 firmware. Thus it supports telemetry, bidirectional DShot and PWM frequency up to 128KHz. The ESC is protected against voltage spikes by a TVS diode.
Check out all our Stacks and the rest of our Skystars Products!
Features:
- 1. Solder pads are the largest in size compared to other FC in market.
- 2. Proper solder pad spacing to avoid solder bridge and facilitate easy soldering.
- 3. ESC connector on top-side rather than bottom which makes it easy for repair.
- 4. TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression.
- 5. Powerful 3A BEC to supply all your electronics.
- 6. Pads arrangement are executed in such a way that when you twist the wires of the camera VTX and RX you don't get any wire overlapping this gives you a uniform twist and clean look.
- 7. Support DJI O3 connector on the top side.
- 8. Support VTX ON/OFF Pit Switch.
- 9. Gyroscope independent power supply, No power lines near MPU6000 Gyro to avoid any EMI interference.
- 10. Two stages of Quality check to reduce any faulty electronic.
- 11. Comes ready with I2C support and INAV.
FC Specifications:
- MCU: STM32F722RET6 216MHz
- Gyroscope: ICM42688P
- Baro:Bmp280
- OSD: Betaflight SPI OSD DJI HD OSD(UART6)
- Black box: 16MB
- 6x Uarts: UART 1/2/3/4/5/6
- 4x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type-C(USB2.0)
- 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST-SH1.0_6pin connector (10V/Gnd/TX6/RX6/Gnd/Sbus)
- VTX 10V/Vbat filtered power ON/OFF Pit switch
- DJI FPV OSD is supported by any spare UART
- LED: 4 LED independent pads, support WS2812 programming lamp output.
- Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
Power:
- Input voltage: 3-6S
- BEC: 5V/10V 3A dual-channel BEC supports stable power supply on the sky side of DJI O3
- LDO 3.3V: Max.250mA
- Flight control onboard voltage sensor.
FC Firmware:
- BetaFlight firmware: SKYSTARSF722Pro
- INAV firmware:SKYSTARSF722HD
Mounting:
- Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
- External size 39mm × 39mm
- Flight control weight: 6.9g
AM32-65A 4IN1 3-6S ESC BLheli32 128K DShot1200 4-in-1 ESC Specifications:
- Support 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
- Excellent over-current capability.
- Extreme stably support 6S LiPo battery with TVS.
- Excellent heat dissipation performance
- Better control performance F4 core MCU support 128K.
- Input voltage: 3-6S LiPo
- Con.Current: 65A
- Peak Current: 90A≥ 10S
- Firmware: AM_32
- Support : Dshot 600/1200
- Mounting hole : 30.5mm/M3
- BEC: No
- Product size: 45.6*45*7.6mm
- Weight: 19g
Package Includes:
- 1x F7HD Pro4 FC
- 1x KM65 128K AM32 4IN1 ESC
- 8x Silicon grommets M4 to M3
- 2x JST-SH1.0_8pin cable, 4cm
- 1x JST-GH-6P cable for DJI port, 10cm
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 868 reviews
Sort
Product Reviews
★★★★★ 5
Really amazing suit that looks like a million bucks!
Size: Large, Color: Black
This is the second suit we bought by Lupurty. The first was dark navy and fit so well and looked so good that we got one in black for our son’s wedding!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 1
Disgusted!
Size: Small, Color: Black
I’m disgusted! I ordered this for my boyfriend to wear to prom. I ordered him a small and the jacket and the vest were not smalls, they look like they were a large. All three pieces had dog or cat hair on them and the jacket had dirt stains on the inside. They were all used! And some of the stitching was coming out! I’m so glad I received it the same day I bought it, because if received it closer to prom I would have been so screwed!!! Do not buy this or buy from this brand! Terrible product!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2026
★★★★★ 5
Dress to Impress: Sharp, Tailored Fit, Quality Material, and Sizing Tips
Size: X-Small, Color: Navy Blue, Size: X-Small, Color: Navy Blue
This review is for the LUPURTY Men's Suits Slim Fit, 3 Piece Suits for Men, 2 Buttons Solid Jacket Vest Pants, Tuxedo Set (XS navy blue and black sets).
I bought the XS knowing my son's measurements were actually below the size guide for that size, but I'm glad I did because it still worked out. The suit was a bit big—especially in the pants, which were quite long, and slightly roomy in the shoulders and arms—but it still looked sharp and well put-together. The overall fit has a clean, tailored appearance despite the extra room. The material feels high-quality and the color is true to what’s shown online. I do wish the black suit came with a black or gray tie instead of blue, which didn’t quite match.
The suit in the photos is the navy blue set that my son wore to his 8th grade graduation, which matched their school colors perfectly.
I also included my son’s measurements to help others with sizing:
Weight 114 lbs
Height 5'3"
Chest 30.5"
Waist 29"
Hip 35"
Sleeve length 21.5"
Shoulder 17"
Inseam 29"
Back length 18.5"
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 9, 2025
★★★★★ 5
Sharp and Expensive Quality Tuxedo for special events!!
Size: Small, Color: Black
I researched for several tuxedos for my son's prom, we chose this one, and I'm very glad that we did! The fit is nice, the durability is great. Very classy looking! The quality is really surprising for this price, it looks like a $200 dollar suit. My son is very picky and was very pleased with this tuxedo. The seams are very good and all the buttons are correct. We did receive the tie and everything that was supposed to be with it as I know reviews were saying they didn't get certain things but we did. I really like the adjustable waste because my son is very slim, but tall and has a long torso. This Tuxedo allowed him to be super excited that we have everything we need for his first prom! True to color as we purchased the black and it is sharp!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
★★★★★ 5
Impressive suit for the price
Size: X-Large, Color: Navy Blue
Order suit in my normal size (44R) and it fit perfectly. I’m 6’1” and the pant length set at the correct level. Quality fabric and stitching is well finished. Pants are comfortable at the waist with enough flex to be forgiving.
Very good deal for the price…suit, vest and tie.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026