Bolt-On Wheel Spacers 50mm 67,1mm 5x108
SKU: 59827761265

Bolt-On Wheel Spacers 50mm 67,1mm 5x108

$116.59 $129.54
Save 10%
No.2 Bestseller on elitecarrentalkenya.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Bolt-On Wheel Spacers 50mm 67,1mm 5x108The price applies to a set for one axle with nuts fixing the spacers to the hubs. Screwed on spacers 50mm thick per side with centering flange. Product description: material PA6 duralumin thread type M14x1. 5 black oxidised steel bushes distance thickness 50mm per side (100mm per axle) hole collar diameter 67. 1mm hole spacing 5x114. 3mm screws included for fixing the spacers to the hubs screw hardness 10. 9 The spacers match: Ferrari 348 GTB V8 3. 4

The price applies to a set for one axle with nuts fixing the spacers to the hubs.

Screwed on spacers 50mm thick per side with centering flange.

Product description:

  • material - PA6 duralumin
  • thread type - M14x1.5 black oxidised steel bushes
  • distance thickness - 50mm per side (100mm per axle)
  • hole / collar diameter - 67.1mm
  • hole spacing - 5x114.3mm
  • screws included for fixing the spacers to the hubs
  • screw hardness 10.9

The spacers match:

Ferrari 348 GTB V8 3.4 1993-1994
Ferrari 348 GTS V8 3.4 1993-1994
Ferrari 348 Spider V8 3.4 1993-1995
Ferrari 348 tb V8 3.4 1989-1993
Ferrari 348 ts V8 3.4 1989-1993
Ferrari 360 Challenge Stradale V8 3.6 2003-2005
Ferrari 360 Modena V8 3.6 1999-2005
Ferrari 360 Spider V8 3.6 2000-2005
Ferrari 456 V12 5.5 1993-2004
Ferrari 512 M V12 5.0 1994-1996
Ferrari 512 TR V12 5.0 1992-1994
Ferrari 550 Barchetta Pininfarina V12 5.5 2000-2002
Ferrari 550 Maranello V12 5.5 1996-2002
Ferrari 575M Maranello V12 5.7 2002-2006
Ferrari 575M Superamerica V12 5.7 2005-2006
Ferrari F355 Berlinetta V8 3.5 1994-1999
Ferrari F355 GTS V8 3.5 1995-1999
Ferrari F355 Spider V8 3.5 1995-1999
Ferrari F430 V8 4.3 2004-2009
Ferrari F430 Spider F 131 B43 4.3 2005-2009
Maserati 3200 GT V8 3.2i 1998-2001
Maserati Coupe V8 4.2i 2001-2007
Maserati Ghibli V6 2.0T 1995-1998
Maserati Ghibli V6 2.8T 1995-1998
MG XPower SV V8 4.6i 2003-2008
MG XPower SV V8 5.0i 2003-2008
Volvo S40 I4 1.9T4 2004-2004
Volvo XC90 I5 2.4D 2008-2009
Volvo XC90 I5 2.4D3 2010-2010
Volvo XC90 I5 2.4D4 2011-2014
Volvo XC90 I5 2.4D5 2005-2014
Volvo XC90 I5 2.5T5 2005-2014
Volvo XC90 I6 2.9T6 2005-2005
Volvo XC90 I6 3.2i 2008-2014
Volvo XC90 V8 4.4i 2005-2011

Our distancers are made of PA6 duralumin roller, which makes them very durable and lightweight at the same time, which makes them also great for riding on the track.

Both the hole and the centering flange are created with a tolerance of up to 0.05 mm, which ensures accurate centering of the wheel and prevents the occurrence of vibrations on the steering wheel that occur when the rim is not properly aligned.

Screwed on spacers are also made of duralumin with pressed knurled pins or steel threaded sleeves, which prevents thread breakage. Both pins and sleeves are secured against being pulled out when tightening the wheel by their two-stage shape.

The advantage of the distances is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders.

Thanks to the use of spacers, we can mount rims with other parameters such as larger offset (ET), because we level the difference precisely through the spacers. You can also use spacers that change the spacing of the bolts, which allows you to install rims from another car with the same number of fixing bolts.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59827761265

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 350 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mike
Grantham, US
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console. The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
E
Verified Purchase
Ezra
Fort Morgan, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
N
Verified Purchase
Nikki05
Chelsea, US
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
R
Verified Purchase
Raniel Nebrida
Dallas, US
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CJKA
Houston, US
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026

recommand products

Butterluxe Adjustable Thin Strap Bra
34.00
Seamless Racerback Built in Bra Ribbed Tank
38.00
Butterluxe Girls Sports Leggings
32.00
Feathery-Fit Athletic Shorts 7''- Lined
55.00
Butterluxe Maternity Built in Bra Tank
51.00