Toyota Auto Transmission Urethane Mount

Toyota Auto Transmission Urethane MountIf you want to replace the transmission mount on a late model Toyota automatic transmission, this is what you want. We've made these Urethane transmission mounts to fit on the factory four bolt mounting top and bottom with long bottom studs for use on thicker cast aluminum cross members . We use our 75A urethane bushings in a fully fabricated steel assembly with a double cross pin design for as much support as we can get, this is a huge gain in

If you want to replace the transmission mount on a late model Toyota automatic transmission, this is what you want. We've made these Urethane transmission mounts to fit on the factory four bolt mounting top and bottom with long bottom studs for use on thicker cast aluminum cross members

. We use our 75A urethane bushings in a fully fabricated steel assembly with a double cross pin design for as much support as we can get, this is a huge gain in rigidity over a stock rubber mount. We also offer 60A bushings if you feel the standard 75A bushings will be to firm. If you have stock rubber mounts on the motor, we would recommend the softer 60A bushings in the trans mount.

This is the only Toyota urethane transmission mount available that directly fits the auto trans 4 bolt pattern and comes with replaceable/servicable bushings.

This mount is typical to the the E340A model transmission but may fit others. The 8mm stud bolt pattern is 1.58" x 2.57", (40mm x 65mm), the through bolt holes are 1.18" x 2.36", (30mm x 60mm).