Zvizzer One Polish: One-Step Polish & Sealant

ONE POLISH is a one-step heavy compound/polish/sealant for removal of scratches and sanding marks from a grain size of P2000 in just one step. Hologram-free! The very homogeneous abrasive grains contained in the ONE POLISH grind steadily during processing, so that despite the high grinding performance, a perfect paint surface is achieved in only one polishing step.

Zvizzer One Polish is a 3-in-1 product: a polish with high grinding performance, protection for up to 6–12 months and a brilliant, shiny finish.

A one-stage sanding and high-gloss product including sealing - to remove scratches and sanding marks from grain size P2000 in just one operation. Hologram-free! The very homogeneous abrasive grain contained in the polish continuously decomposes into increasingly fine particles during processing. As a result, a perfect paint surface is achieved in just one polishing process despite high abressing performance.

Water-based, silicone- and solvent-free. Zvizzer One Polish can be used on both fresh and completely hardened varnishes.

For processing, we recommend - depending on the condition of the paint - one of the Zvizzer polishing sponges or the Zvizzer microfiber pad. Apply a sufficient amount of One Polish to the pad or directly to the paint surface. Then at low speed (approx. 1000 rpm) and bake at approx. 1800 rpm at medium pressure.

To avoid damage to the surface, always use a clean polishing sponge or a clean polishing coat.