Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Comstock-Castle Value Series 15-1/2 Inch Wide Tube-Type Floor Gas Fryer, 50 lb. Fat Capacity, 120,000 BTUComstock Castle Value Series 15 1 2 Inch Wide Tube Type Floor Gas Fryer, 50 lb. Fat Capacity, 120,000 BTU Snap Action Thermostat, Standing Pilot, Stainless Steel Fry Tank A compact floor fryer with a 50 lb. fat capacity, tube type heat system, and 120,000 BTU output for dependable high volume frying. 15 1 2 inch wide floor model is built for compact commercial kitchen spaces. 50 lb. fat capacity tube type fry pot supports steady service output. Snap
Comstock-Castle Value Series 15-1/2 Inch Wide Tube-Type Floor Gas Fryer, 50 lb. Fat Capacity, 120,000 BTU
Snap-Action Thermostat, Standing Pilot, Stainless Steel Fry Tank
A compact floor fryer with a 50 lb. fat capacity, tube-type heat system, and 120,000 BTU output for dependable high-volume frying.
- 15-1/2 inch-wide floor model is built for compact commercial kitchen spaces.
- 50 lb. fat capacity tube-type fry pot supports steady service output.
- Snap action thermostat and standing pilot help maintain reliable cooking temperatures.
- Stainless steel fry tank and door with galvanized sides for durable construction.
- 120,000 BTU input delivers strong heat for quick recovery.
- Configured without basket lifts or a filtration system for a straightforward setup.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 201 reviews
Sort
Product Reviews
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
recommand products
Dog Bed Cover 36L x 27W x 4H Inch,Heavy Duty Durable Waterproof Fluffy Soft Short Plush Replacement Dog Bed Covers,Washable Removable Pet Bed Mattress Cover with Zipper.Grey,Cover Only.
33.59
Bruce Haack: Hush Little - VINYL LP
19.98
Ryoizen Dog Stairs Ramp for Small Dogs, Pet Stairs Tool for High Bed Couch, Dog Ladder as Puppy Stuff, 3 Tiers Non-Slip Pet Stairs with High Density Foam, Gifts Lint Roller for Dogs, Grey Black
69.99
Billy Nasty: Glass A - 12-INCH SINGLE
13.98
Dogbed4less 2 Pack Internal Duvet Case Waterproof Zipper Dog Bed Cover for Large 41"x27"X4" Memory Foam Pad Pet Bed - 45"X31" FLAT
39.19