Blackmagic Design Spares - Camera PCC4K - Fan Replacement Kit
SKU: 31827640409

Blackmagic Design Spares - Camera PCC4K - Fan Replacement Kit

Sale price$415.56 Regular price$461.73
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Blackmagic Design Spares - Camera PCC4K - Fan Replacement KitThe Blackmagic Design Spares Pocket Cinema Camera 4K (PCC4K) Fan Replacement Kit is the essential thermal management component for the PCC4K. While the 4K model generates slightly less heat than the 6K, it still requires active cooling to prevent the sensor from overheating, which causes "thermal noise" (grainy artifacts) in your shadows and eventually leads to system shutdown. Kit Components The OEM fan kit for the PCC4K typically includes: Brushless

The Blackmagic Design Spares - Pocket Cinema Camera 4K (PCC4K) - Fan Replacement Kit is the essential thermal management component for the PCC4K. While the 4K model generates slightly less heat than the 6K, it still requires active cooling to prevent the sensor from overheating, which causes "thermal noise" (grainy artifacts) in your shadows and eventually leads to system shutdown.

Kit Components

The OEM fan kit for the PCC4K typically includes:

  • Brushless Blower Fan: A low-profile, ultra-quiet fan designed to fit the specific curvature of the Pocket chassis.

  • Vibration Isolation Mounts: Small rubber bushings that prevent the fan's rotation from creating mechanical noise that the internal microphones would otherwise pick up.

  • Mounting Screws: Specialized small-gauge screws to secure the fan to the internal frame.


When to Replace the Fan

Since the fan is the only mechanical moving part inside the camera, it is the most likely component to wear out over several years of use.

  • Grinding or Rattling: If the camera sounds like it has "sand" inside it, the ball bearings in the fan have failed.

  • Sudden Silence: If you no longer feel air moving through the top vents and the camera body feels unusually hot to the touch.

  • "High Temp" Warning: If the camera displays a thermal warning on the LCD and shuts down within minutes of booting.

  • Intermittent Operation: If the fan only kicks in when you tap the camera body—a sign of a dead spot in the motor or a loose connector.


Technical Installation Note

Repair Level: 2 (Moderate). You will need to open the camera, but you do not need to desolder any components.

  1. Back Plate Removal: You must remove the rear chassis (the part with the LCD). Warning: The LCD ribbon cable is extremely short. Do not pull the back plate away quickly; tilt it carefully and disconnect the ribbon cable first.

  2. Clear the Airways: While the camera is open, check the intake (bottom) and exhaust (top) grills. Over time, these collect lint and dust. Even a brand-new fan will fail if the airflow path is blocked.

  3. Connector Seating: The fan connects to the Main PCB via a tiny 3-pin or 4-pin "Molex" style connector. Ensure this is clicked in fully; if it's loose, the camera’s software may think the fan is failed and prevent the camera from recording.

  4. Avoid Pinched Wires: When reassembling the two halves of the camera, ensure the thin fan wires are tucked into their designated channels so they aren't crushed by the chassis screws.

Pro-Tip: The "Vacuum" Test

Before buying a new fan, try using a vacuum hose or a can of compressed air on the top exhaust vent while the camera is off. Occasionally, a single piece of grit or a hair gets stuck in the blades, preventing them from spinning. If a quick blast of air clears the obstruction and the fan spins freely again, you might save yourself a teardown!

Is your fan making a loud physical noise, or has it stopped spinning entirely?

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 31827640409

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 531 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mark A.
Phoenix, US
★★★★★ 4
Pleased. Looks nice and set up well.
Looks nice and is a unique look to put mementos, small book, and photos. Pretty solid when tightened up properly. Shelves have a cheap veneer to them but you can’t tell until you touch it. It is very secure if you attach this to a stud. I did not drill to the floor and it is fine. Wall anchors suck in drywall and this is big enough you should be attaching to one stud minimum. Here is A little trick to secure the shelving unit properly if the studs don’t work in your favor. Take a pine 1x3 or 1x4 and cut to the width of the shelving. Paint them the same color as the wall. You will barely notice the board. Place the assembled shelve amd mark where the pipe anchors attach on the wall. Use those marks to place the boards and drill them directly to studs. Mount the pipe feet anchors to the board. See picture. Solid!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 29, 2022
T
Verified Purchase
Tamlynn
Birmingham, US
★★★★★ 5
Would bug again.
I bought this product for my daughters room to put her Legos on. The support poles are actually metal every bit of them. I can see where people were disappointed with the shelves but this one’s I got we’re not bad. I didn’t expect for 120 bucks solid wood shelves. The quality was good I was happy with my purchase. I turned them upside down and attached to the ceiling so it made assembly a little tricky. I like the results. The instructions are like six pictures for the whole thing, very hard to figure out especially when you are turning it upside down.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2022
Z
Verified Purchase
Zano
Los Angeles, US
★★★★★ 5
Amazing book shelf/ LOOKS GREAT
Very good product, sturdy, easy to install, love it‼️
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2023
M
Verified Purchase
manuel aranda
Waukegan, US
★★★★★ 5
A sturdy holder
It’s made well and is versatile. I have the shelf as 2 separate pieces. Perhaps not meant to be separated, I have done so. The pipping pieces are mostly unfixed, so your options are greater as to your personal finish. I recommend greatly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2021
C
Verified Purchase
Claire
Natrona Heights, US
★★★★★ 5
Beautiful bargain bookcase
Industrial, discreet but stylish. Looks so good!! Shelves aren’t super high quality but what do you expect??
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2024

recommand products