Wera 074790-010 Custom Pre-Set Fixed Torque Screwdriver, 0.1 - 0.34 Nm

Wera 074790-010 Custom Pre-Set Fixed Torque Screwdriver, 0.1 - 0.34 NmWera 074790 010 Custom Pre Set Fixed Torque Screwdriver, 0. 1 0. 34 Nm For any application where the same constant torque and repeat accuracy are required Factory pre set torque screwdriver with Rapidaptor quick release chuck Desired fixed torque setting can be specified in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb. Fixed value can be easily adjusted between 0. 1 and 0.

Wera 074790-010 Custom Pre-Set Fixed Torque Screwdriver, 0.1 - 0.34 Nm

For any application where the same constant torque and repeat accuracy are required
Factory pre-set torque screwdriver with Rapidaptor quick-release chuck
Desired fixed torque setting can be specified in the following units: Nm, kgf. m, lbf. ft., ozf. in., dN. m, kgf. cm, lbf. in, in. oz, cN. m, gf. m, ft. lb, gf. cm, in. lb.
Fixed value can be easily adjusted between 0.1 and 0.34 Nm using Wera's Recalibration Kit and any appropriate torque tester
Rapidaptor technology for rapid 1/4" hex bit change
Distinct signal when pre-set value is reached
Multi-component Kraftform handle for high working speeds
Unlimited counter-clockwise torque for loosening stuck screws
Handle length: 89 mm
Total length: 133 mm
Manufacturer's part number 05074790010

Note: this screwdriver is pre-set at the factory and requires a specified torque value at the time of ordering.